To Next PageTo Next Page
Need help?Do you have a question about the Marantz SR9600 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.05% |
| Damping factor | 100 |
| Input sensitivity | 200 mV |
| Speaker load impedance | 4 - 16 ohms |
| Frequency Response | 10 Hz - 100 kHz |
| Signal-to-Noise Ratio | 105 dB |
| Inputs | 7.1-channel analog input |
| Outputs | 7.1 channel output |
| Tuning range | FM/AM |
| Power Output | 140 watts per channel into 8 ohms (stereo) |
Details specifications for FM and AM tuners, including frequency range, sensitivity, and distortion.
Lists audio output power, input sensitivity, video characteristics, and HDMI version format.
Explains THX Re-Equalization, Timbre Matching, and Adaptive Decorrelation technologies for enhanced audio.
Describes THX ASA technology for optimal surround sound experience with multiple speakers.
Explains THX BGC feature for improving bass balance in specific room layouts.
Procedure to check AVSS function for B voltage switching based on input signal.
Details steps for checking cooling fan speeds based on heat sink temperature and test resistors.
Procedure to check overheat protection function and its effect on unit operation.
Steps for adjusting variable resistors to set target idling current for each power amplifier channel.
Instructions on how to access and navigate the service mode for diagnostics and version checks.
Steps to reset the unit's backup memory to default status and initialize the microprocessor.
Lists common error indications displayed on the FLD, including DSP, EEPROM, and communication issues.
Instructions for downloading software from Renesas and installing it for microprocessors.
Step-by-step guide for updating the MAIN and SUB microprocessors using the writing software.
Detailed steps for updating the DSP flash microprocessor using the ECOM Upgrade DSP software.
Procedure for updating the MRAC microprocessor firmware using the Renesas Flash Development Toolkit.
Illustrates the electrical connections between major components and boards.
Shows the functional blocks of the receiver and their interrelationships.
Provides detailed circuit schematics for various sections of the receiver.
Details pin functions for PCM mode, including I/O, use, and description.
Details pin functions for DSD mode, including I/O, use, and description.
Lists pin functions for various ICs such as YAC526, 74HC4051, and others.
Visual guides showing the placement of components on various printed circuit boards.
Comprehensive list of electrical components, including resistors and capacitors.
