o
Power Saving
Enables the Power Saving feature of the AVR to reduce energy costs
when using the TV's speakers.
This function is activated in the following cases.
0
When “TV Audio” is selected as the input source of this unit
0
When playing content from a device connected by HDMI
On: Use Power Saving feature.
Off
(Default):
Do not use Power Saving feature.
0
“Power Saving” can be set when “HDMI Control” is set to “On”. (v p. 171)
Output Settings
Makes settings for video output.
o
HDMI Video Output
Select the HDMI monitor connector to be used.
Auto(Dual)
(Default):
The presence of a TV connected to the
HDMI OUT MONITOR 1 or HDMI OUT
MONITOR 2 connector is detected
automatically, and that TV connection is
used.
Monitor 1:
A TV connected to the HDMI OUT
MONITOR 1 connector is always used.
Monitor 2:
A TV connected to the HDMI OUT
MONITOR 2 connector is always used.
0
If both the HDMI OUT MONITOR 1 and HDMI OUT MONITOR 2 connectors
are connected and “HDMI Upscaler” is set to “Auto”, the signals are output
with a resolution that is compatible with both TVs. (v p. 174)
0
You can check which resolutions are compatible with your TV in “HDMI
Monitor 1” and “HDMI Monitor 2”. (v p. 223)
0
When connecting multiple Dolby Vision TVs, the signal will only be optimal for
one TV. A TV connected to the HDMI OUT MONITOR 1 connector has
priority.
Contents Connections Playback Settings Tips Appendix
173
Front panel Display Rear panel Remote Index
To Next Page
Loading...
