[ REMARK ]
CDRL3610/10 unit ( CDR Module ) and CDM3610’ are not standard spare parts. The repairing of component level for those units
is not allowed at local service agents also, except loader mechanical parts.
Rejected CDRL3610/10 unit ( CDR Module ) should replace by Central Repair Procedure. Please contact to following MARANTZ
regional office or your local MARANTZ national organization about the Central Repair Procedure.
MARANTZ JAPAN, INC.
35- I , 7- CHOME, SAGAMIONO
SAGAMIHARA - SHI, KANAGAWA
JAPAN 228-8505
PHONE : +81 427 48 9379
FAX : +81 427 48 0889
JAPAN
Technical
MARANTZ EUROPE B. V.
P.O.BOX 80002
BUILDING SFF2
5600 JB EINDHOVEN
THE NETHERLANDS
PHONE : +31 - 40 - 2732241
FAX : +31 - 40 - 2735578
EUROPE / TRADING
MARANTZ AMERICA, INC.
440 MEDINAH ROAD
ROSELLE, ILLINOIS 60172
USA
PHONE : 630 - 307 - 3100
FAX : 630 - 307 - 2687
USA
EPROM ( 7322 )
This USER SOFTWARE has been stored in EPORM ( 7322 ). This EPROM, situated on the upper side
of the Main Board of the CDR module, is in easy reach, once the tray is open. On the EPROM, you will
find a sticker with the following indications :
MAIN DR-17
V.1.xx
7322
V.1.xx is the software version.
As this IC is mounted on a socket, it can easily be replaced an EPROM containing the last software
version. This EPROM can be ordered with service code number ;
DR-17 : 4822 900 11335
The latest software update information will be reported by the SERVICE BULLETIN.
(latest version EPROM will be supplied with same service code number always)
DR-17
To Next Page
Loading...
