Marantz DV4500 - Video Connection to Television; Connecting to TVs Without Input Jacks

1-5-1 E59M2DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
(1): Identification (location) No. of parts in the figures
(2): Name of the part
(3): Figure Number for reference
(4): Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P=Spring, L=Locking Tab, S=Screw,
CN=Connector
*=Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5): Refer to “Reference Notes.”
About tightening screws
When tightening screws, tighten them with the follow-
ing torque.
Reference Notes
CAUTION 1: Locking Tabs (L-1), (L-2) and (L-3) are
fragile. Be careful not to break them.
1-1. Connect the wall plug to an AC outlet and press
the [OPEN/CLOSE] button to open the tray.
1-2. Remove the Tray Panel by releasing two locking
tabs (L-1).
1-3. Press the [OPEN/CLOSE] button again to close
the tray.
1-4. Press the [POWER] button to turn the power off.
1-5. Unplug an AC cord.
1-6. Disconnect connector CN2081.
1-7. Release two Locking Tabs (L-2). Then release
three Locking Tabs (L-3), and remove the Front
Unit.
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Note
[1] Top Cover D1 5(S-1) -
[2] Front Unit D2
*2(L-1), Tray Panel,
*2(L-2), *3(L-3),
*CN2081
1
1-1
1-2
1-3
1-4
1-5
1-6
1-7
[3]
Function
CBA
D3 6(S-2) -
[4]
Front
Assembly
D3 ---------- -
[5] Rear Panel D4 8(S-3), 3(S-4) -
[6]
DVD Main
CBA Unit
D5
(S-5A), (S-5B),
*CN201, *CN301,
*CN401, *CN601
2
2-1
2-2
[7] DVD Mecha
D5
D6
4(S-6)
2
3
[8] LED CBA D7 *CN2082 -
[9] AV CBA D7 3(S-7), (S-8) -
[10] Loader Base D8 4(S-9) -
[11]
Power PCB
Holder
D8 2(S-10) -
[1] Top Cover
[4] Front Assembly
[2] Front Unit
[5] Rear Panel
[10] Loader Base
[6] DVD Main CBA Unit
[7] DVD Mecha
[11] Power PCB Holder
[8] LED CBA
[3] Function CBA
[12] Stopper Bracket
[9] AV CBA
[12]
Stopper
Bracket
D8 ---------- -
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Screws Torque
(S-1), (S-2), (S-3), (S-4),
(S-5A), (S-6), (S-7), (S-8),
(S-9), (S-10)
0.45 ± 0.05 N·m
(S-5B) 0.38 ± 0.04 N·m
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Note