31
接続の設定でCOMポートを使用するCOMポート番号に
し、
"OK"をクリックします。
6. COMポートのプロパティの設定をビット/秒:9600、デー
タビット:
8 パリティ:なし、ストップビット:1、フロ
ー制御:なしとします。
"OK"をクリックします。
If the following screens come out, input these items.
Country/Region
Ex.: United State of America (1)
Area Code Ex.: 123
Connect using
Ex.: COM4 (choose the COM port number to use.)
Click "OK".
6. It is a setup of a HyperTerminal COM port.
Set up as follows.
Bit per second: 9600, Data bits: 8, Parity: None, Stop
bits: 1, Flow control: None
Click "OK".