Marantz M1 - External Device Playback; USB Flash Drive Music Playback

Playing music from an external
device
1
Connect an external device to the digital optical,
analog RCA stereo or HDMI input on the back of this
unit.
2
Tap the “Home” tab.
3
Select “Inputs” from the “Sources” section.
4
Select the name of this unit and which input to which
you connected the audio device in step 1.
5
Initiate playback on the audio device.
o
HDMI control function
Connect this unit to a TV that supports the HDMI control function with
an HDMI cable and enable the HDMI control setting on the TV to
perform basic operations on this unit (changing the input source,
turning the power on and off, adjusting the volume) with the remote
control of the TV.
Refer to “About HDMI” (v p. 45) for more information about the
HDMI control function.
Playing music from a USB flash
drive
1
Insert a FAT32 or NTFS formatted USB flash drive into
the USB port on the rear panel of this unit.
2
Tap the “Home” tab.
3
Select “USB” from the “Sources” section.
4
Select the name of this unit.
5
Browse the music on your USB flash drive and select
something to play.
NOTE
0
It may take several minutes for the name of this unit to appear in the “USB” list if
you have a large number of files on your USB flash drive.
0
It is not possible to connect and use a computer via the USB port of this unit using
a USB cable.
Contents
Setup Playback Troubleshooting Status LED Appendix
23