Marantz M1 - Appendix and Specifications; Power Management Modes

Power management
o
Quick Start Mode
This unit automatically enters “Quick Start Mode” to save power in the
following cases. This unit will automatically resume to full power
whenever the device is selected and playing music.
The status LED dims when the mode is switched to Quick Start Mode.
n
Ethernet
After around 20 minutes of no operation and no network access
after playing music via Ethernet.
n
Wi-Fi
After around 20 minutes of no operation and no network access
after playing music via Wi-Fi.
n
USB
After around 20 minutes of no operation and no network access
after playing music from a USB flash drive.
n
Bluetooth
After the Bluetooth connection is disconnected and there is around
20 minutes of no operation and no network access after playing
music via Bluetooth.
n
Optical input
After around 20 minutes of no operation after optical device is put
into standby.
n
TV HDMI (eARC/ARC)
Connect this unit and the eARC/ARC compatible TV with HDMI
cable and play TV. Around 20 minutes after TV is put into standby.
Contents Setup Playback Troubleshooting Status LED Appendix
42