www.marantz.eu
FEATURES MM7025
Channels 2
Current Feedback Topology o
Phono EQ: Standard/Current Feedback/Constant
Current Feedback
- / - /-
HDAM version -
Power Transformer: Toroidal/El - / o
High Grade Audio Components o
Customised Components o
Symmetric PCB layout -
Aluminium extrusion heatsink o
Copper plated chassis -
Tri-Tone Control (Bass/Mid/Treble)
Balance/Bass/Treble/Loudness -
OTHER
Linear Drive Power Supply o
BTL possibility -
Bi-Amp and Multichannel option -
Shottkey diodes -
Input Buffer Amp (All inputs/CD only) o / -
Seperate solid heatsinks -
System block shielding: copper/metal/none - / - /-
Double layer bottom plate -
Source Direct -
Power Amp Direct -
Standby mode - / - / - / -
INPUTS/OUTPUTS
Phono Input: MM/MC - / -
Balanced In/Out 2 / -
Pre-Out/Main In - / 2
Power Amp Direct In o
Gold Plated Chinch -
Speaker A/B -
Speaker terminal: Screw/Marantz/WBT o / - / -
Number of terminals 2
Marantz remote bus o
Remote power control (Trigger In/Out) o
Flasher In/IR receiver In o / -
Headphone Out -
SPECIFICATIONS
Power Output (8/6 Ohm RMS) 140/170 Watts
Power Output (8/6 Ohm DIN) -
Power Output (8/6 Ohm IHF) -
Bridged Power Output (8 Ohm RMS) -
Frequency Response 8Hz-100kHz
Total Harmonic Distortion 0.03%
Damping Factor 100dB
Input Sensitivity: MM -
Input Sensitivity: MC -
Signal to Noise Ratio: MM/MC - / -
Input Sensitivity: High level 1.2V/22kohm
Input Sensitivity: Balanced High level 2.4V/30kohm
Signal to Noise Ratio: High level 105dB
GENERAL
Available colors: Gold/Silver/Black/Silver-Gold - / - / o / -
Metal Front Panel o
Power Consumption in W 220
Standby Consumption in W 0.4
Auto Power off o
Detachable Power Cable o
Remote Control -
System Remote Function -
Maximum Dimensions (W x D x H) in mm 440x350x126
Weight in kg 10.5
Design and specifications are subject to change by Marantz without notice.
MM7025 Stereo Main aMplifier