.
A
Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 47)
A
Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
B
Turn clockwise until the antennas is fully connected.
C
Rotate the antenna upwards for best reception.
.
B
FLASHER IN jack
Used when using a control BOX or other such control devices to control
this unit.
C
Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
0
“Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)” (v p. 36)
0
“Connection 3 : TV equipped without an HDMI
connector” (v
p. 37)
0
“Connecting a set-top box (Satellite tuner/cable TV)” (v p. 39)
D
NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v
p. 46)
E
REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v
p. 48)
Contents
Connections Playback Settings Tips Appendix
20
Front panel Display Rear panel Remote Index
To Next Page
Loading...
