Marantz PM-11S3 Specifications

General
Power supply: AC 120 V, 60 Hz
Power consumption:
300 W
0.2 W (Standby)
Dimensions (W x H x D):
17 3/8” x 6 5/8” x 17 7/8”
440 x 168 x 453 mm
Weight: 58.6 lbs, 26.6 kg
©2012 Marantz America, LLC.
For purposes of improvement, specifications and design are subject to change without notice.All specifications, dimensions and weights are subject to
change without notice. D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet
which may result in consequential errors Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information
contained within this document.
*Design and specifications are subject to change without notice.
Call for Assistance: 9:00AM to 8:00PM M-F E.S.T.
For frequently asked questions please visit www.marantz.com
1-855-ONE-MARANTZ
1-855-663-6272
Specifications
20060511A
HDAM SA3
Pre-amp power circuit
Marantz Original High quality / High-purity Copper
Speaker terminals
Rigid Premium Chassis
Power amp block
Audio section
Power output:
(20 Hz - 20 kHz both channels driven)
100W x 2 (8 ohms load)
200W x 2 (4 ohms load)
Total harmonic distortion :
( 20 Hz - 20 kHz both channels driven , 8 ohm load)
0.01%
Output band width (8 ohm load, 0.05%) : 5Hz ~45kHz
Frequency response (CD, 1W, 8 ohm load):
5Hz ~ 120kHz±3dB
Damping factor (8 ohm load, 20Hz – 20kHz): 100
Input sensitivity/Input impedance
PHONO (MC) : 260μV/100
Ω
ohms
PHONO (MM) : 2.7mV/47k
Ω
ohms
BALANCED : 480mV/40k
Ω
ohms
CD/LINE : 240mV/20k
Ω
ohms
P. DIRECT IN: 1.7 V/20k ohms
Output voltage/Output impedance
PRE OUT : 1.9 V/220
RIAA deviation (20Hz ~ 20kHz) : ±0.5dB
S/N (IHF-A, 8 ohm load)
PHONO (MC) : 76dB (0.5mV input, 1 W output)
PHONO (MM) : 88dB (5mV input, 1 W output)
BALANCED : 109dB (4V input, Rated output)
CD/LINE : 108dB (2V input, Rated output)
Tone control
Bass (50Hz) : ±8dB
Treble (20kHz) : ±8dB
Port
XLR (Balanced) input
Balanced 1
RCA (Unbalanced) input
Phono (MM/MC) 1
CD 1
Line 1 1
Line 2 1
P. Direct 1
Recorder 1 1
Recorder 2 1
RCA (Unbalanced) output
Recorder 1 1
Recorder 2 1
Pre 1
Control
Remote cotrol (IN/OUT) 1/1
F.C.B.S. (IN/OUT) 1/1
Other
Headphones 1

Marantz PM-11S3 Specifications

General

Damping factor	100
Amplifier class	-
Frequency range	5 - 100000 Hz
Input sensitivity	240 mV
Audio output channels	2.0 channels
Peak power per channel	200 W
Signal-to-Noise Ratio (SNR)	96 dB
Total Harmonic Distortion (THD)	0.01 %
Dynamic power per channel (8 Ohm)	100 W
XLR in	Yes
Headphone outputs	1
Line inputs (RCA)	2
Headphone connectivity	6.3 mm
Speakers connectivity type	Clamp terminals
Material	Metal
Cooling type	Passive
Product color	Black, Gold
Volume control	Rotary
Connectivity technology	Wired
Power consumption (standby)	0.3 W
Power consumption (typical)	300 W

Weight and Dimensions

Depth	449 mm
Width	440 mm
Height	168 mm
Weight	27000 g