Marantz SR5001 - Tuner Contents; XM Contents

SR5001 RS-232C Control Specification Page: 13 / 20
Document Version [1.0]
Company Restricted
5-1-4. Tuner contents
Command Reply from Slave
VALUE
“TFQ:0xxxxx“ (xxxx
x = freq.)
UP “TFQ:1“
DOWN “TFQ:2“
Auto-UP “TFQ:3“
Tuner Frequency
Auto-DOWN “TFQ:4“
“TFQ:xxxxx”
(xxxxx = Frequency)
if ( xxxxx < 00256 ) band = XM;
else if (xxxxx < 02000) band=AM;
else band=FM;
(ex.“08750” = FM87.50MHz)
*Auto-UP/DOWN dose not operate in
XM
*XM can be selected When Band is XM.
VALUE “TPR:0ww”
UP “TPR:1”
DOWN “TPR:2”
P-Scan start “TPR:3”
Tuner Preset
P-Scan stop “TPR:4”
“TPR:ww”
(ww = current preset nr.)
(ww = 01 ~ ??)
TOGGLE “TMD:0”
OFF(MONO) “TMD:1”
Tuner mode
ON(AUTO) “TMD:2”
“TMD:0”( - ),
“TMD:1” (MONO),
“TMD:2” (AUTO)
Tuner MEMO - “MEM:0” ACK
CLEAR - “CLR:0” ACK
Tuner Numeric
keys
Key0,
Key1,
Key2,
Key3,
Key4,
Key5,
Key6,
Key7,
Key8,
Key9
“NUM:0”
“NUM:1”
“NUM:2”
“NUM:3”
“NUM:4”
“NUM:5”
“NUM:6”
“NUM:7”
“NUM:8”
“NUM:9”
ACK
5-1-5. XM Contents
Command Reply from Slave
TOGGLE “XDP:0”
NORMAL “XDP:1”
ART/SNG “XDP:2”
CATEGORY “XDP:3”
XM DispMode
STATUS “XDP:4”
“XDP:1”(NORMAL)
“XDP:2”(ART/SNG)
“XDP:3”(CATEGORY)
“XDP:4”(STATUS)
VALUE “CAT:0xx”
CH. UP “CAT:1”
CH. DOWN “CAT:2”
CAT. NEXT “CAT:3”
XM Category
CAT. PREV “CAT:4”
“CAT:yxx”
y= 1(un search), 2(in search)
xx= Category No. 00(none), 01 to 32