Marantz SR5001 - Specific Commands

SR5001 RS-232C Control Specification Page: 15 / 20
Document Version [1.0]
Company Restricted
Command Reply from Slave
TOGGLE “MSP:0”
OFF “MSP:1”
Multi Room
Speaker
ON “MSP:2”
“MSP:1”,
“MSP:2”
VALUE “MSV:0xxx”
UP “MSV:1”
DOWN “MSV:2”
VARIABLE “MSS:1”
Multi Room
Speaker
VOLUME
FIXED “MSS:2”
“MSV:xxx”
xxx = vol. value as +90 ~-90
TOGGLE “MSM:0”
OFF “MSM:1”
Multi Room
Speaker
AUDIO MUTE
ON “MSM:2”
“MSM:1”,
“MSM:2”
5-2. Specific Commands
Command from Host Reply from Slave
Auto status feedback
(The product default is all
auto status feedback
disabled.)
“AST:x” (x = ‘0’ ~ ’F’)
bit 3 : Layer 4 ( 1 = Enable, 0 = Disable)
bit 2 : Layer 3 ( 1 = Enable, 0 = Disable)
bit 1 : Layer 2 ( 1 = Enable, 0 = Disable)
bit 0 : Layer 1 ( 1 = Enable, 0 = Disable)
same as
command define