Marantz SR5005 Service Manual (English)

Other manuals for Marantz SR5005

Service Manual165 pages

User Guide91 pages

User Manual91 pages

Specifications2 pages

Questions and Answers:

F
felicialunaAug 21, 2025
Why is my Marantz Receiver not responding to the remote control?
- D
  Dominique OsborneAug 21, 2025
  If the remote control isn't working with your Marantz Receiver: * Replace the batteries with new ones. * Ensure you're within 23 ft/7 m and within a 30° angle of the unit. * Remove any obstructions between the remote and the receiver. * Verify the batteries are inserted correctly, matching the polarity marks. * Shield the receiver's remote sensor from strong light sources like direct sunlight or fluorescent lights.
S
sarafloresAug 23, 2025
Why is there no audio output from my Marantz Receiver?
- A
  Adam PattersonAug 23, 2025
  If audio is not coming from your Marantz Receiver, try these steps: * Check all device connections. * Verify the speaker connections. * Ensure the audio device is powered on. * Adjust the master volume. * Deactivate mute mode. * Select the correct input source and mode. * Disconnect headphones, as they may disable speaker output.
M
michael94Aug 25, 2025
How to fix a Marantz Receiver that does not turn on?
- W
  woodphilipAug 25, 2025
  If your Marantz Receiver isn't powering on: * Make sure the power plug is fully inserted into the outlet. * If the protection circuit is active, unplug the receiver, wait 5-10 seconds, and plug it back in.
S
santosjodiAug 26, 2025
What to do if no video is output with HDMI connection on Marantz Receiver?
- S
  Samantha CastilloAug 27, 2025
  If you're not getting video output via HDMI on your Marantz Receiver: * Check the HDMI cable connections. * Ensure the input source matches the connected HDMI port. * Verify that your TV supports HDCP. Incompatibility can prevent video output.
M
Michael SolisAug 27, 2025
How to troubleshoot no sound from the subwoofer on my Marantz Receiver?
- K
  Kathryn AvilaAug 27, 2025
  If your Marantz Receiver's subwoofer isn't producing sound: * Check the subwoofer connections. * Ensure the subwoofer is powered on. * In the menu, set "Speaker Config." – "Subwoofer" to "Yes". * Note: If "Front" and "Center" are set to "Large" and "Subwoofer Mode" is set to "LFE", the subwoofer might not output sound depending on the input signal or surround mode.
B
Brandon ConnerAug 29, 2025
How can I improve the radio reception on my Marantz Receiver?
- D
  Donald LeonAug 29, 2025
  If you're experiencing poor reception, noise, or distortion on your Marantz Receiver: * Try adjusting the antenna's orientation or position. * Keep the AM loop antenna separate from the unit. * Consider using an FM outdoor antenna. * Keep the antenna away from other connection cables.
R
Ronald HernandezAug 30, 2025
Why is there no audio output with HDMI connection on my Marantz Receiver?
- Y
  yatesjenniferAug 31, 2025
  If you're not getting audio with an HDMI connection on your Marantz Receiver: * Check the HDMI connector connections. * To output audio from the speakers, set “HDMI Audio Out” to “Amp” in the menu. * To output audio from a TV, set “HDMI Audio Out” to “TV” in the menu.
K
Keith StokesSep 1, 2025
Why is Dolby TrueHD not working on my Marantz Receiver?
- J
  jason13Sep 1, 2025
  If Dolby TrueHD, DTS-HD, or Dolby Digital Plus audio isn't outputting from your Marantz Receiver, ensure you are using HDMI connections.
J
Jessica GrahamSep 3, 2025
Why is there no sound from the surround back speaker on my Marantz Receiver?
- S
  Shaun SilvaSep 3, 2025
  If there's no sound from the surround back speaker on your Marantz Receiver: * Set “Amp Assign” to “Normal” in the menu. * Ensure “Speaker Config.” – “S.Back” is set to something other than “None”. * Make sure the surround mode is not set to “STEREO.”
J
jonathan80Sep 4, 2025
Why is there no sound from the front height speaker on my Marantz Receiver?
- A
  asandersSep 4, 2025
  If no sound comes from the front height speaker of your Marantz Receiver: * Set “Amp Assign” to “Normal” in the menu. * Set “Speaker Config.” – “Surround” to something other than “None.”

Marantz SR5005 Specifications

General

Channels	7.1
HDMI Inputs	4
HDMI Outputs	1
Signal-To-Noise Ratio	100 dB
Input Sensitivity	200 mV
Tuner Bands	AM/FM
HDMI Switching	Yes
3D Technology	Yes
Frequency Response	10Hz-100kHz
Damping Factor	100
Tone Control	Bass, Treble
Dolby Technologies	Dolby Digital Plus, Dolby TrueHD, Dolby Pro Logic IIz
DTS Technologies	DTS-HD Master Audio, DTS Neo:6
Audyssey Technologies	Audyssey Dynamic EQ, Audyssey Dynamic Volume
Dimensions	440 x 161 x 346 mm
Response Bandwidth	10Hz-100kHz
Input Impedance	47k ohms
Speaker Impedance	6 - 8 Ohm
Power Output	100 watts per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Amplifier Output Details	100 watts per channel (8 ohms, 20Hz-20kHz, 0.08% THD)