Marantz SR5015 - Checking the Reception Intensity of Stations (Tuning Aid); Setting the Order of Broadcasting Station (Station Order)

Checking the reception intensity of
stations (Tuning Aid)
The reception intensity of the currently tuned in frequency is displayed.
Use this if your preferred station cannot be received.
1
Press OPTION during DAB reception.
The option menu screen is displayed.
2
Use ui to select “Tuning Aid”, then press ENTER.
3
Use ui to select a frequency to tune into. It takes
around 4 - 5 seconds to correctly display the reception
signal level after selecting a frequency.
4
If necessary, adjust the position of the antenna so that
the reception signal level beyonds “5”.
The station can now be received.
5
Press ENTER.
Select a station.
0
Stations you have selected before can be re-selected by pressing TUNE + or
TUNE – on the remote control unit.
Setting the order of broadcasting
station (Station Order)
Select your preferred order of service list created by the Auto Scan
function.
1
Press OPTION during DAB reception.
The option menu screen is displayed.
2
Use ui to select “Station Order”, then press ENTER.
3
Use o p to select your preferred order.
Alphanumeric
(Default):
In alphabetical order.
Multiplex: In order of frequency.
Contents Connections Playback Settings Tips Appendix
106
Front panel Display Rear panel Remote Index