Specifications – Audio Section
HOME
Audio section
Power amplifier
Rated output
Front 110 W + 110 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center 110 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround 110 W + 110 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround back 110 W + 110 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Maximum effective
output power:
Front 190 W + 190 W (6 Ω/ohms, 1 kHz with 10 % T.H.D.)
Center 190 W + 190 W (6 Ω/ohms, 1 kHz with 10 % T.H.D.)
Surround 190 W + 190 W (6 Ω/ohms, 1 kHz with 10 % T.H.D.)
Surround back 190 W + 190 W (6 Ω/ohms, 1 kHz with 10 % T.H.D.)
Output connector 6 – 8 Ω/ohms
Analog
Input sensitivity/Input impedance 200 mV
Frequency response 10 Hz – 100 kHz — +1, –3 dB (Direct mode)
S/N 100 dB (IHF–A weighted, Direct mode)
Distortion 0.005 % (20 Hz – 20 kHz) (Direct mode)
Rated output 1.2 V
Digital
D/A output
Rated output 2 V (at 0 dB playback)
Total harmonic distortion 0.008 % (1 kHz, at 0 dB)
S/N ratio 102 dB
Dynamic range 100 dB
Digital input Format Digital audio interface
Phono equalizer
Input sensitivity 2.5 mV
RIAA deviation ±1 dB (20 Hz to 20 kHz)
S/N 74 dB (IHF-A)
Distortion factor 0.03 % (1 kHz, 3 V)
SPECIFICATIONS - VIDEO –
TUNER - GENERAL
Upgrades/Updates 2
SPECIFICATIONS -
DIMENSIONS - WEIGHT
16