To Next PageTo Next Page
Need help?Do you have a question about the Marathon V-4830 and is the answer not in the manual?
General| Brand | Marathon |
|---|---|
| Model | V-4830 |
| Category | Lawn and Garden Equipment |
| Language | English |
Welcome message and overview of the manual's importance for safe operation and performance.
Essential safety checks and procedures to follow before operating the baler.
Diagrams and labels for control panels of various baler models (HD, LP, V-6030, V-4830).
Detailed explanation of each button, switch, and light on the baler's control panel.
Step-by-step guide on how to create a bale using different baler models.
Instructions for tying off and ejecting bales from various baler models.
Visual representations of the bale tie-off and ejection process for different models.
Diagram illustrating how to clean the tie slots using the provided tool.
Description and location of all warning decals for safety and compliance.
Detailed steps for safely locking out and tagging out the baler for maintenance.
Instructions and warnings for securely supporting the platen before performing service.
Schedule and tasks for monthly, three-monthly, and annual maintenance of the baler.
Steps for setting hydraulic pressure and testing magnetic interlock systems.
Guides for removing the hydraulic cylinder from various baler models.
Guides for rebuilding hydraulic cylinders and adjusting limit switches for bale size.
Instructions for adjusting the feed gate latch tension and striker.
Explanation of how the baler operates for different model series.
Technical specifications and dimensions for various baler models.
Guide on how to set the timer parameters using binary switches on the circuit board.
Reference charts for electrical components, wire sizes, and recommended oils.
Comprehensive list of parts for different baler models with part numbers.
Wiring diagrams for the panel boxes of HD, LP, V-6030, and V-4830 models.
Diagrams of power unit components for various baler models.
Schematics illustrating the hydraulic system layout for typical and specific baler models.
Guide to diagnosing and solving common problems with the baler.
Procedures and safety requirements for safely moving and positioning the baler.
General guidelines for installing the baler, including site preparation and anchoring.
Instructions and precautions for connecting the baler to the electrical supply.
Steps to follow for initial start-up and checks after installation.
