1.0 Foreword
Congratulations on the purchase of a MAREDO ST series machine. To
ensure a safe and long-lasting operation of this MAREDO ST machine the
owner and/ or operator using this machine should read and understand
this user’s manual.
Ensure that you understand and practice the safety rules, as described in
this manual and shown on the decal.
2.0 Technical specifications
Model : MAREDO STrac 700 REV. 02
Transport width : Rear wheel position behind machine: 90 cm. / 35”
: Rear wheel position beside machine: 130 cm. / 51”
Working width : 66 cm. /26”
Engine model : HONDA GX270 9 HP
Engine oil : 1 L 5W50 Synthetic motor oil
Hydraulic oil : 4 L 5W50 Synthetic motor oil
Max. Forward speed : Hydrostatic 6 km./h.
Max. Reverse speed : Hydrostatic 4 km./h.
PTO drive : 540 rpm. Fully mechanical
Weight : STrac 700 only: 245 kg. / 540 lbs.
Gasoline tank : 3 L / 0.7 Gal.
Gasoline : Unleaded E10 (Europe) or unleaded Gas (World)
This MAREDO STrac 700 is delivered accomplished by a warranty against
material, design, and assembly errors. This warranty applies for a period
of 12 months, starting on the date of purchase.
3.0 EU- Declaration
We, MAREDO BV, Rijksstraatweg 16, 3956 CR Leersum, The Netherlands,
hereby declare fully on our authority, that the product:
MAREDO MT200 Flex-Verticutter, with serial numbers as indicated on the
machine and in this manual, to which this declaration applies, has been
manufactured in line with NEN-EN –ISO 14121-1:2007, according to the
stipulations of The Machine Directive 2006/42/EG.
Marinus Reincke CEO MAREDO BV:
The Netherlands
To Next Page
Loading...