2015, Marilyn Systems, llc.
29
File: CONFIG.003
; Example DAR-01 Configuration File
; Written by: JLP
;
; -Tracks 12 through 27 will be looped endlessly in BGM mode.
; each time the BGM loop is interrupted, the volume will take 5
; to ramp up to the set level of 80 percent.
;
; -Play one track at a time from 1 through 5 each time input 1
; is made. Retentive is enabled which means that the track count will
; be maintained for this input action even if another input action occurs.
;
; -Play one track at a time from 6 through 11 each time input 2
; is made. Retentive is enabled which means that the track count will
; be maintained for this input action even if another input action occurs.
;
; -Internal amplifier is enabled. Boost is disabled for 4-ohm speakers.
; -User Level pot controls volume from 0 to 100 percent.
; -User LED is lit while playing.
; -Status output contacts are closed while playing.
[Startup]
Action= BGM
FirstTrack= 12
LastTrack= 27
Volume= 80
FadeRate= 50
[Audio]
AmpEnabled= Yes
AmpBoost= No
[Input1Make]
Action= Play
FirstTrack= 1
LastTrack= 5
Retentive= Yes
[Input2Make]
Action= Play
FirstTrack= 6
LastTrack= 11
Retentive= Yes
[VolumeControl]
Enabled= Yes
Min= 0
Max= 100
[PlayLed]
Enabled= Yes
[StatusOutput]
Mode= Playing