Marklin Digital 60653 - Recognizing a Master;Slave; Update MS2

22
Recognizing a Master/Slave
The locomotives must first be registered at the “Master”-MS2. To do this, use the MS2
with the lower serial number, because this unit automatically becomes the „Master“.
The serial number can be read in the menu for the MS2 as follows:
SHIFT
then additionally press
Select:
MS2 information
Scroll to select
Read serial
number
Select:
Update MS2
Update MS2
Select: Scroll
SHIFT
then additionally press
Select: Update
railbox
Update instructions can
be found on the Internet
at www.maerklin.de -->
Service --> Technical
Information.