42
SAFETY INSTRUCTIONS
Read the operating instructions carefully before use!
Please retain for future reference.
• Read the operating instructions carefully in respect of electrical wiring.
If connected incorrectly, the car stereo will be damaged.
• If possible, the stereo should be installed by a professional.
• Do not connect the power cable until all other connections to the car stereo
have been made.
• Insulate all exposed cables in order to avoid short circuiting.
• Once installation is complete, all loose cables should be secured.
• The car stereo is designed to be powered by a 12-15 V system with negative
earth. Check that your car has such an electrical system.
• Connect the car stereo in accordance with the wiring diagram.
If you do not, it will not work as intended and damage may occur.
• The speakers must be connected correctly, otherwise there is a danger
that both the amplier and the speakers will be damaged.
• If the aerial cable (BLUE) is earthed or is connected incorrectly,
the car stereo may break or be impossible to turn on.
• If the power cable (YELLOW) is earthed or is connected incorrectly,
the car stereo may break or be impossible to turn on or o.
• If the memory cable (RED) is earthed or is connected incorrectly,
the car stereo may break or be impossible to turn on or o.
TECHNICAL DATA
FM receiver
Frequency range 87.5-108 MHz
Signal/noise ratio 50 dB
Radio sensitivity 10 dB
AM receiver
Frequency range 522–1,620 kHz
Intermediate frequency 455 MHz ±5%
Signal/noise ratio 45 dB
Radio sensitivity 40 dB
Operating instructions for
car stereo
ENGLISH
To Next Page
Loading...
