52
WIRING DIAGRAM
1. The car stereo is powered by 12 V DC with negative earth. Check that the electrical
system of your car is compatible before starting installation.
2. The stereo’s automatic aerial and subwoofer have separate power supplies.
3. The stereo must be connected in accordance with the wiring diagram. If the stereo
is connected incorrectly, the car’s electrical system may suer damage.
4. The speaker cables (-) must be connected to the correctly marked input (-).
5. Do not obstruct valves or cooling anges, otherwise the stereo may overheat and break.
NB Unscrew the lock screw before
installation. In order to avoid
damaging the car stereo, connect
the cables in accordance with the
wiring diagram.
To Next Page
Loading...
