51
1. PWR: Used to turn the car stereo on/o.
2. Mode/: Used to change function. Also used to end telephone calls in Bluetooth mode.
3. AMS button: Automatic channel scanning. Also used to save channels found.
4. MUTE button: Turns o the sound.
5. BAND/ button: Switches between the dierent frequency bands. Also used to answer
telephone calls in Bluetooth mode.
6. The ”Arrow up/Arrow down” buttons are used to browse through menus and
channels/tracks, etc.
7. VOL+: Increases volume.
8. EQ: Activates the equaliser.
9. ”Arrow left/Arrow right” buttons: Used to select between options, e.g. display MP3 covers
or to switch between status modes.
10. SEL: Multifunction selection.
11. LOC/: Used to select whether the stereo is to be controlled from the front panel or
the remote control.
12. VOL -: Lowers volume.
13. SCAN/: Automatic channel scanning.
14. Buttons 0-9. Can be used to select tracks. Buttons 1-6. In radio mode, these are used
to select from the 6 saved channels.
– During music playback:
– Press 2 to browse tracks.
– Press 3 to repeat a track.
– Press 4 to play tracks in a random order.
– Press and hold 5 to skip back 10 tracks at a time.
– Press and hold 6 to skip forwards 10 tracks at a time.
– Press and hold 7 to switch to stereo in radio mode.
– Press and hold 8 to switch between MP3/MP5/picture modes.
– Buttons 0-9: In Bluetooth mode, these can be used to place a telephone call.
15. In radio mode - press these buttons to initiate automatic channel scanning,
keep them pressed to initiate manual channel scanning. In playback mode, these buttons
are used to select options. Bluetooth calls: Press * # and then the digits of the number
you want to call.
16. Enter: conrm your selection.
To Next Page
Loading...
