MARS DRINKS AROMA™ User Guide
12
How to Dispense Hot Water
1. Ensure there is not a Freshpack in the brewer and that the pack door is
closed.
2. Press and hold the HOT WATER button. Hot water will begin to flow while
the button is pressed.
a. NOTE: Only the HOT WATER indicator light will be illuminated during
the dispensing of hot water.
3. Release the button to stop the flow of water. The hot water flow will
automatically stop after a maximum vend volume has been reached if the
button is not released.
How to Make an Iced Beverage
1. Follow the “How to Make a Coffee, Tea, Hot Chocolate or Soup” steps
above to create your drink of choice in a standard size cup.
2. Pour your beverage over a large glass with ice.
3. Enjoy!
Caring for Your Brewer
Daily Care of your brewer should include refilling the cold tank with
filtered water and emptying the drip tray.
Refilling the Cold Tank with Water
When the brewer requires refilling with water, the WATER diagnostic light will
flash.
The cold tank can be filled with a jug or detached from the brewer and filled
directly from a faucet.
Carefully fill the reservoir with drinking water. Do not overflow the tank.
Please ensure that the tank is properly fitted to the brewer.
To Next Page
Loading...