MARS DRINKS AROMA™ User Guide
14
• Take care not to get soapy water into the cold tank, as this will affect drink
taste.
Pack Door Removal
To maintain cleanliness of the brew chamber the pack door can be removed. The
pack door should only be fitted and removed in open position.
CAUTION: Do not attempt to operate the brewer without the pack door fitted.
1. Open the pack door by sliding the handle from left to right.
2. Pull the pack door straight down to remove it from the brew head.
3. To re-fit the pack door, push the door straight up until click is felt.
Storage
If the brewer has been previously used, it should only be used or stored in a frost
free environment to prevent it from becoming damaged.
Before storing the brewer you should remove and empty the cold tank. After a
period of storage or if the system is left unused for a period greater than one
week, we recommend that you rinse the cold tank thoroughly and perform a HOT
WATER cycle with fresh, filtered water to rinse the Brewer.
Periodic Maintenance: Descaling your Brewer
Regular descaling will prolong the life of your brewer and will ensure optimal
brewing performance for the life of your brewer. It is recommended that the
brewer be descaled at least once every six months. In areas with hard water, it is
recommended to descale more frequently.
1. Fill the cold tank with a descaler diluted in water according to the
manufacturer’s guidelines.
• NOTE: Please ensure the cold tank has at least 51floz (1.5L) of water
to complete the descale cycle.
2. Remove the drip tray and place a large container in the dispense area.
To Next Page
Loading...