What to do if my MARS DRINKS Coffee Maker is leaking water?
If your MARS DRINKS Coffee Maker is leaking water, make sure the pack door is fully closed when brewing. Also, check that the cold tank and the drip tray are not overflowing.
Why my MARS DRINKS Aroma does not operate?
If your MARS DRINKS Coffee Maker isn't operating, first check that the plug is correctly inserted into the socket. Then, ensure that the power button is switched on and illuminated.
What to do if none of the indicator lights are illuminated on my MARS DRINKS Coffee Maker?
If none of the indicator lights on your MARS DRINKS Coffee Maker are illuminated, verify that the plug is correctly inserted into the socket and that the power button has been pressed and is illuminated. Also, the brewer may be heating the water to the optimum temperature for brewing; this may take up to 60 seconds.
Why is the WATER diagnostic light flashing on my MARS DRINKS Aroma Coffee Maker?
The flashing WATER diagnostic light on your MARS DRINKS Coffee Maker indicates that it’s time to refill the cold tank. Check the cold tank indicator level.
What to do if my MARS DRINKS Aroma Coffee Maker does not brew after pressing the selection button?
If your MARS DRINKS Coffee Maker doesn't brew beverages after pressing the selection button, make sure that the Freshpack is fully inserted and that the pack door is fully closed.
Why is the amount of beverage dispensed by my MARS DRINKS Aroma repeatedly too small or high?
The internal parts of the MARS DRINKS Coffee Maker may have become blocked with scale.
What to do if my MARS DRINKS Coffee Maker does not deliver hot water?
If your MARS DRINKS Coffee Maker does not deliver hot water after pressing and holding the HOT WATER button, ensure there is no pack inserted and that the pack door is fully closed.
Why is the DOOR diagnostic light flashing on my MARS DRINKS Coffee Maker?
If the DOOR diagnostic light is flashing on your MARS DRINKS Coffee Maker, verify that the pack door is closed. If it is open, slide the handle from right to left to close the door. The DOOR diagnostic light will flash until the door is fully closed.
How to prevent liquid from splashing out of my MARS DRINKS Aroma Coffee Maker?
To prevent liquid from splashing out of your MARS DRINKS Coffee Maker, ensure the cup is as close to the bottom of the pack door as possible during brewing. Also, make sure your cup or mug is placed in the center of the cup stand.
What does it mean if the PACK diagnostic light is flashing on my MARS DRINKS Aroma Coffee Maker?
If the PACK diagnostic light is flashing on your MARS DRINKS Coffee Maker, it means that a pack inserted into the brewer must be removed. Remove the pack to continue using the brewer.
Instructions on how to turn the brewer on and off, and its auto-shutoff feature.
Details on available drink selection buttons for brewing various beverages.
Information about Freshpacks, their function, and compatibility with the brewer.
Step-by-step instructions for initial setup and first brew.
Procedure for refilling the brewer's cold water tank and capacity.
Step-by-step guide for brewing standard drinks using Freshpacks.
Instructions for preparing cappuccino and latte drinks using two Freshpacks.
Recommended schedule and procedure for descaling the brewer.
Checks for when the brewer fails to power on or function.
General| Brand | MARS DRINKS |
|---|---|
| Model | Aroma |
| Category | Coffee Maker |
| Language | English |
To Next Page