MARS DRINKS AROMA™ User Guide
8
Selecting your Cup
Our Recommendation
The use of MARS DRINKS 10oz. paper cups is recommended.
Alternative cups or mugs may be used providing they are of similar proportions
(3.3”/84mm x 2.2”/56mm x 4.1”/104mm) and weigh a minimum of 5g. The
maximum width of the brew area is 4.89”/124mm.
Use of cups that do not meet the recommended criteria may result in overflow or
mess creation.
Using a Large Cup or Travel Mug
Large cups or travel mugs (approximately
4.42”/112mm to 5.59”/142mm in height) that
will not fit on the cup stand may be
accommodated by removing the drip tray and
placing the cup or mug directly under the
dispense head.
Using a Small Cup
Small cups (less than 2.82”/72mm in height), like
espresso glasses, may be accommodated by
repositioning the drip tray to the higher position.
Remove the drip tray and slide it along the
grooves until the lip of the drip tray catches in
place. Magnets will help guide the way and
ensure correct positioning.
For further advice on cups and mugs suitable for use with your brewer please
contact customer service or your local MARS DRINKS distributor.
CAUTION: Please be aware that the minimum cup size for use with a large drink
to avoid overflow is 10floz (300ml), unless manually adjusted. Reference
“Adjusting the Cup Volume” on page 9.
To Next Page
Loading...