Remote Control Manual - PS-121B / PSH-141A
8
HOW TO USE THE BUTTONS
Examples of Timer Setting
TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful when you want
the unit to turn on automatically. For instance, you
can set the unit to turn on before you will be returning
home, and the unit will automatically start operating at
the set time.
Example:
To start the unit in 6 hours:
1. Press the TIMER ON button, the last setting of
starting operation time and the signal “h” will show
on the display area.
2. Press the TIMER ON button to display “6:0h” on the
TIMER ON display of the remote controller.
3. Wait for about 3 seconds and the digital display
area will show the temperature again, indicating the
function has been activated.
IMPORTANT
The effective operation time set by the remote controller for the timer function is limited to the following
settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12,
13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.
To Next Page
Loading...
Need help?
General
