Marsh PatrionPlus - Adjusting Product Counts; Viewing Messages; Viewing a Saved Message; Viewing an RS-232 Insert

ENGLISH-9
29933/02080 Rev CA
1. Begin from homescreen while message is printing. Press . Highlight Adjust
Counts option; press . Product Counts screen is displayed.
2. Highlight field you want to change (see Adding a Product Count for types) and type
in new number. Note: To reset to starting number, either press (resets to
001); type in starting number; or to adjust by one count, use and .
VIEW MESSAGE
1. Dual-tasking only: From homescreen, press either or to select
correct task.
2. From homescreen, press . Highlight View option; press .
3. Select message (type or highlight message name); press or .
4. To view another saved message, press .
1. Dual-tasking only: From homescreen, press either or to select
correct task.
2. From homescreen, press . Highlight New option; press .
3. Press .
4. Highlight View RS-232 Inserts; press .
5. Press .
Viewing an RS-232
Insert
Viewing a Saved
Message
Adjusting Product
Counts