Marsh PatrionPlus - Specifying Inverted Print; Designating Master Printhead; Setting Print Trigger; Time and Date Settings

1. Use to highlight printhead for inverted print.
2. Press .
3. Highlight Inverted; press .
1. Use to highlight printhead you want to designate as the master.
2. Press .
3. Highlight Master option; press .
1. Press .
2. Highlight desired trigger option; press .
1. Press .
2. Highlight Shaft Encoder option; press .
TIME & DATE
1. Begin from homescreen. Press . Ensure Time & Date option is highlighted;
press . Set Time & Date screen is displayed.
2. Highlight field you want to change.
3. Type in new time (24-hour format); new day (corresponding day of week number;
1 = Sunday); new date (DD/MM/YY format).
ENGLISH-2
29933/02080 Rev CA
Specifying Inverted
Print
Designating Master
Printhead
Setting Print Trigger
Designating Shaft
Encoder
Setting the Current
Time, Day, Date