Marsh PatrionPlus - Message Deletion and Quitting; Deleting an Existing Message; Exiting a Message Screen; Font Settings

ENGLISH-10
29933/02080 Rev CA
DELETE MESSAGE
1. Dual-tasking only: From homescreen, press either or to select
correct task.
2. From homescreen, press . Highlight Delete option; press .
3. Select message (type or highlight message name); press or .
4. Confirm delete by pressing . To cancel, press or .
QUIT MESSAGE
1. Begin from message screen. Press . Highlight Quit option; press .
2. To save changes before quitting, press ; to close message screen without
saving, press .
FONTS
If changing a specific message element, select and highlight it + before
beginning either function.
1. To change font or select boldface type, always begin from a message screen. Press
. Pop-up menu of available fonts/options is displayed.
2. Highlight desired font size; press .
1. Highlight Bold option; press .
Note: The Bold option is not available for HR printheads.
Changing the Font
Changing to Bold
Type
(7 Dot, 16 Dot, 16
DOT)
Exiting a Message
Screen
Deleting an Existing
Message