Marshall Amplification CV420-30X-IP - Picture Quality Settings

CV420-30X-IP Manual
www.marshall-usa.com 18
4.3.7 Picture Settings
No Item Function Descriptions
1 Picture effect Set picture effect, Off / Film / Black and White
2 2D noise reduction
settings
• 2D noise reduction settings
3 3D noise reduction
settings
• 3D noise reduction settings
4 Image mode • The user may customize his/her desired image mode
5 Image mode load • When no custom setting is needed, reset the picture parameters back to the factory
default by selecting this item
6 Gamma • Gamma Level adjustment; Adjustable when the image mode is set to Custom
7 Brightness • Brightness adjustment; Adjustable when the image mode is set to Custom
8 Contrast • Contrast adjustment; Adjustable when the image mode is set to Custom
9 Saturation • Saturation adjustment; Adjustable when the image mode is set to Custom
10 Sharpness • Adjust the sharpness of the image
1
2
3
4
5
6
7
8
9
10