Marshall Amplification EMBERTON III - Getting Started 005; Using the Control Knob 005; Charging the Speaker 005; Battery Indicator 005

005
EMBERTON III – FULL ONLINE MANUAL
BACK TO INDEX
005
ENGLISHINSTRUCTIONS
GETTING STARTED
I. Push and hold the Power button until the speaker turns on.
II. Push and hold the Bluetooth button until the LED turns to a slow
blue pulse.
III. Select EMBERTON III from your audio device’s Bluetooth list.
USING THE CONTROL KNOB
• Play/pause – push once
• Skip backward/forward – push left/right
• Turn up/down the volume – push up/down
• Receive/end a call – push once
• Reject a call – push twice
CHARGING THE SPEAKER
Use the included USB-C cable to connect the speaker to a USB power source
(5 V, 3 A). The USB-C power input port is located on the right side of the
speaker.
Note: Always make sure that the speaker is completely dry before charging it.
BATTERY INDICATOR
The 10-segment battery indicator shows the battery charge. A rising
animation indicates that the battery is charging.