007
EMBERTON III – FULL ONLINE MANUAL
BACK TO INDEX
007007
ENGLISHINSTRUCTIONS
PAIRING A NEW DEVICE
Emberton III can be connected with 2 devices at a time and remembers up to
8 previously paired devices. When in range, it will try to reconnect with the
last connected device.
I. Push and hold the power button until the speaker turns on.
II. Push and hold the Bluetooth button until the LED turns to a slow
blue pulse.
III. Select EMBERTON III from your audio device’s Bluetooth list.
RESETTING THE SPEAKER
A factory reset will reset the speaker to its original settings, excluding any
firmware updates.
Note: This will delete all user settings and the speaker will need to be set up
again.
I. Remove EMBERTON III, and EMBERTON III [LE] if present, from your
sound device’s Bluetooth list.
II. Ensure that the speaker is on.
III. Push and hold the Bluetooth button for 7 seconds. The Bluetooth
indicator turns quickly red, and the speaker restarts.
IV. The speaker has returned to its factory settings and is ready to be paired,
see the section Getting started.
MARSHALL BLUETOOTH APP
Download the Marshall Bluetooth app to get the most out of your
speaker and keep it up to date with the latest software.
To Next Page
Loading...
