Marshall Amplification Stanmore Bluetooth User Manual

TROUBLE SHOOTING
021.
THE STANMORE
BLUETOOTH DOES
NOT TURN ON.
The speaker is not connected
to AC mains.
Ensure that the STANMORE
BLUETOOTH is plugged into
a working AC wall socket,
see page 009.
Change the selected sound
source, see page 018.
Connect the sound source to
the speaker, see 012 or 015.
Slightly increase the volume
on your sound source, then
slightly increase the volume
on the speaker, see 019.
Ensure that the audio cable
is properly connected, see
page 015.
Slightly increase the volume
on your sound source, then
slightly increase the volume
on the speaker, see 019.
Decrease the volume on your
sound source.
Lower the volume or bass
boost on the STANMORE
BLUETOOTH, see page 019.
PROBLEM CAUSE ACTION
THERE IS NO
SOUND
THE SOUND IS TO
LOW
THERE IS A
CRACKLING SOUND
Wrong input for audio source
is selected.
Sound source not connected
via Bluetooth or cable.
Volume is set too low on
either the sound source or the
STANMORE BLUETOOTH.
The audio cable is not properly
connected.
Volume is set too low on
either the sound source or the
STANMORE BLUETOOTH.
The amplifier is clipping if it
runs out of power.

Marshall Amplification Stanmore Bluetooth Specifications

General

Brand	Marshall Amplification
Model	Stanmore Bluetooth
Category	Speakers
Language	English