TROUBLESHOOTING
018.
PROBLEM CAUSE ACTION
THE SPEAKER IS
NOT RESPONDING
A software problem has
occurred.
1. Turn the speaker off by
turning the volume knob
counter-clockwise until you
hear a click.
2. Wait 15 seconds, then turn
the speaker on again.
Push and hold the Bluetooth
button for 7 seconds to reset
the speaker to default settings.
Note: After this reset the
speaker will forget all
Bluetooth pairings.
Bluetooth
CONNECTION
DROPS OUT
The two Bluetooth devices are
too far apart or the connection
is affected due to obstacles.
Move the devices closer so
that they are within 10 metres,
and unobstructed by obstacles
such as walls or doors.
There is a strong electric field
surrounding the Tufton.
Items such as microwave
ovens, wireless network
adapters, fluorescent lights
and gas cookers use the
same frequency range as the
Bluetooth device. This may
lead to electrical disturbances.
To Next Page
Loading...
