EasyManuals Logo

Marshall Electronics CV630-IP User Manual

Marshall Electronics CV630-IP
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
English - 14
4. Combine the metal plate A and the metal plate B
(1) Push the metal plate A up to the ceiling and then to the right to latch the metal
plate B into place.
(2) And then secure with 2 x M3 silver screws and 1 x M3 black screw
4.2.2.7 How to remove
1. Remove the connected cables and wires from the camera
2. Uninstall the camera attached to ceiling, loosen the three screws that fix the
metal plates A and B and push to the left to remove the camera
3. Then remove the screws on the hanger and the camera

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marshall Electronics CV630-IP and is the answer not in the manual?

Marshall Electronics CV630-IP Specifications

General IconGeneral
Megapixel8 MP
Camera typeSingle camera
Sensor type-
Optical zoom30 x
Zoom capabilityYes
Optical sensor size1/2.5 \
Vertical field of view (wide)70 °
Networking standardsIEEE 802.3at
Maximum frame rate- fps
Supported video modes720p, 1080p, 3840p
Video formats supportedH.264, H.265, HEVC
Maximum video resolution3840 x 2160 pixels
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160
Pan range0 - 340 °
Product colorBlack
Tilt angle range0 - 120 °

Related product manuals