27
Monitor Specifications
Panel Specifications
Screen Size 17.3”
Screen Resolution 1920 x 1080
Brightness 400 cd/m
2
Contrast Ratio 600:1
Burn-In Warning
The QVW-1708-Q uses a high quality LCD panel.
However, if a static image is left on the screen for 48
hours, there may be a 10 to 20 minute recovery period
for the panel. During recovery, a very faint image may be
retained on the display. Put up a white image for 30
minutes to eliminate the retained image.
Connectors
Modular Inputs
2 x Input Module Slots
Video Inputs / Outputs
Optional Modules Available – 3G-SDI ( 2 x Input /
Output)
Power Input
4-Pin XLR
Tally / GPI Interface
HD-15 Female connector
RS-422/485 Interface
2 x RJ12 (Modular 6P6C)
1 x RJ12 (Host port)
Ethernet (Remote Control Page)
1 x RJ45
Electrical
Voltage Requirement 12 VDC
Power Consumption 5.0 A
Included Power Supply V-PS12V-5A-XLR
Tally / GPI Connector
Connect the corresponding pins (under G,R,Y), and
execute a dry contact closure by connecting it to either
of the GRND pins listed.
Mechanical
Weight 9.35 Lbs
Operating Temperature 0° C – 35° C
Storage Temperature -10° C – 50° C
To Next Page
Loading...
