20
■
Peaking (Focus assist)
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture.
You can turn the Peaking filter ON and adjust the Threshold and Color by accessing the Adjust function. Use the BRIGHT knob
to adjust the Threshold. Adjusting the Threshold to a higher value forces the Peaking algorithm to react quicker to objects
that are in focus. Use COLOR knob to adjust the Color. Your choice is are Red (default), Yellow, Pink, Green and Blue.
■
Clip
The Clip function is used to visually filter data on the screen that is under a Lower Threshold or over an Upper Threshold.
Data on either side of the filters can be filtered with a custom color.
The Lower Threshold numerical value and color can be adjusted using the BRIGHT and COLOR knob, respectively.
The Upper Threshold can be adjusted using the CONTRAST and USER knob, respectively.
13
The outer square represents the entire image and the inner grey box represents your current Pixel to Pixel selection.
Use the COLOR knob to move your selection LEFT and RIGHT. Use the CONTRAST knob to move your selection UP or DOWN.
Press the SELECT button or the ROTOMENU knob to lock in your selection.
■
DSLR Preset
Use the DSLR Preset option to reduce the visibility of on screen indicators shown with popular DSLR cameras. The available
options are :
• NK 16:9
• NK 3:2
• CN 16:9
• CN 3:2
Color Submenu
■
Temperature
Use this setting to choose one of three color temperature presets:
• D55 (5500K)
• D65 (6500K)
• D93 (9300K)
• Custom (Adjustable Color Bias and Gain)
• Linear (No processing is applied to the panel)
■
Bias & Gain
Select this submenu to fine-tune the monitor’s color balance (R, G, B). This should only be done by someone experienced
with video engineering, as this will alter the overall color shading of the screen. The purpose is to allow color matching to
other types of monitors and/or displays. Note: The Color Temperature preset will automatically switch to Custom when Color
Bias settings are adjusted. It is normal for color bias adjustments to be very subtle.
IMD Configuration Submenu
To Next Page
Loading...
Need help?
General
