Copyright © 2020 Martin Audio Ltd. 9
ADORN USER GUIDE V1.0
ADORN USER GUIDE
Fit the cabinet half of the bracket to the speaker using the four screws in the centre of the rear of the cabinet.
The cabinet can be fitted to the wall by linking the two halves of the bracket using the M4 Allen head bolt.
Ceiling-mounting
An alternative option is to ceiling mount the ADORN on-wall speakers using the optional ceiling bracket, part number CDDCB5.
Fit the cabinet half of the bracket to the speaker using the four screws in the centre of the rear of the cabinet. For ceiling installation, the
bracket must be installed in the orientation below:
To Next Page
Loading...
