1998-08-03 23Software Log
1.0
97/10/1
• DMX protocol version 2 implemented.
• Martin protocol implemented.
• 65 combined colors implemented on one DMX channel.
• Random pulsating dimmer and iris implemented.
• Pulsating dimming implemented.
• New demo program "dEM2" implemented: pan and tilt limits and partially random sequences may be programmed.
• dEMO program renamed "dEM1". Both demo programs now under a "dEMO" menu.
• New menu item FTST->STST (factory test -> sensor test) with programs for sensor testing on COL1, COL2, Rgob,
and Fgob.
0.9
• Beta version, not released
0.8
97/9/23
• Linear control of dimmer motors for smoother dimming.
• Linear dimming curve
• New programs for color 1, color 2, rot. gobo wheel and fixed gobo offset adjustment under "CAL".
• Dimmer and strobe speeds adjusted
• Strobe bug in "ADJ", "MAN", "TSEq" and "dEMO" fixed.
0.7
97/9/2
• Demo mode implemented
• PCBt menu enhanced with "LED" prog. for factory PCB testing
• Max color speed reduced
• DMX vector speeds changed for focus and rot. gobo.
• Boot mode no longer necessary for upload
• "IRR" Iris Reflection Reduction: When ON, the iris closes slightly from full open to limit reflected light.
0.6
97/8/27
• Strobe dimming implemented
• Effects speeds adjusted
0.5
• Prototype software
Version
& Date Changes
To Next Page
Loading...
