Need help?Do you have a question about the Mase IS. 2.5 and is the answer not in the manual?
Read all instructions, avoid untrained use, keep away children/animals, and handle with dry hands.
Verify oil level, secure mounting, disconnect loads, and check connections before starting.
Follow the sequence for starting the engine using ON/Start buttons and stopping with the 'OFF' button.
Monitors low oil pressure, high engine/alternator temperature, and overload for automatic shutdown.
Service only when engine is stopped and cooled, performed by skilled staff.
Service the engine at regular intervals as per manufacturer's recommendations.
Check oil level with dipstick and perform oil changes via the designated hole.
Empty the water intake circuit before maintaining the water-air exchanger.
For long periods of disuse, replace oil, filters, anodes, drain cooling circuit, and lubricate pump.
Identifies control panel components and lists alarm codes with their causes for generator trips.
Outlines maintenance tasks required at specific hour intervals (10 to 1000 hours).
Lists common complaints, probable reasons, and checks for diagnosing and resolving issues.
Details engine model, displacement, RPM, bore/stroke, power, fuel, oil capacity, and inclination.
Provides alternator type, output, power factor, insulation class, and frequency.
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Engine Type | 4-stroke, single cylinder, OHV, air-cooled |
| Fuel Type | Petrol |
| Starting System | Recoil |
To Next Page
