To Next PageTo Next Page
Need help?Do you have a question about the Mase IS 8 and is the answer not in the manual?
Outlines the manual's role and intended audience for safe and proper generator operation.
Lists integral documents such as the EEC declaration of conformity and service logbook.
Provides details on machine code, serial number, and year of construction for identification.
Explains the function of each control, indicator, and warning light on the generator's instrument panel.
Details critical safety guidelines for operating, installing, and maintaining the generator to prevent hazards.
Provides an overview of the generator's design, soundproof casing, Yanmar engine, and alternator.
Describes the closed-circuit coolant system and heat exchangers for engine and casing cooling.
Details the functions of the local control panel, including pilot lights and the engine protection module.
Essential pre-operation checks for oil level, connections, and electrical utilities before starting the generator.
Procedure for removing air bubbles from the fuel system to ensure correct engine operation.
Step-by-step instructions for safely starting the generator engine using the control panel button.
Procedure for properly shutting down the generator to allow for engine and alternator cooldown.
Explains the low oil pressure protection and its indicator light for engine safety and timely intervention.
Describes the high coolant temperature protection, its signal, and the need to resolve the fault cause.
Details the alternator overheating protection, its warning light, and the procedure for restarting.
Explains protection against overcurrents via a magnetothermal switch for electrical safety.
Describes the thermal switch protection for the low-voltage system and the need for technician intervention.
Outlines periodic engine maintenance tasks and refers to the manufacturer's manual for details.
Instructions for checking, topping up, and changing engine oil and filter, including capacities and intervals.
Guidance on cleaning the dry air filter using diesel fuel for engine air intake quality.
Steps for replacing the fuel filter cartridge to ensure engine longevity and proper functioning.
Procedure for checking and maintaining the coolant level in the closed-circuit cooling system.
Instructions for checking and adjusting V-belt tension for optimal power transmission.
Steps for draining the cooling system for maintenance of the water/air exchanger.
Annual procedure for replacing the coolant in the closed-circuit cooling system.
Guidance on checking and replacing zinc anodes to protect heat exchangers from galvanic corrosion.
Instructions for checking the seawater pump rotor and accessing it for inspection.
Information on the alternator's self-energised type and its limited maintenance requirements.
Recommendations for battery types, checking electrolyte levels, and storage during inactivity.
Recommended procedures for generator storage and maintenance during extended periods of non-use.
A table detailing maintenance tasks and their recommended intervals in operating hours.
Common operational issues, their potential causes, and recommended solutions for the generator.
General| Brand | Mase |
|---|---|
| Model | IS 8 |
| Category | Portable Generator |
| Language | English |
