6 Foreign matter should be prevented from entering
into the battery during dismounting and
installation.
7 The breathing pipe must be kept unblocked.
Replacement of Fuse
Set the ignition switch to “OFF” position. The
specified fuse tube of 15A should be used for main fuse
replacement, and a 10A fuse tube for FAI injection
nozzle.
Open the left side cover, remove the fuse holder on
the side of the battery and replace the fuse tube.
If the new fuse tube is broken again as soon as it is
fitted on, it means that somewhere of the electric parts is
shorted unexpectedly.
Caution
Do not use any fuse over 15A
Be sure not to wash the battery when washing the
vehicle.
Brake lamp adjustment
If the rear brake lamps abnormally light up and go out,
adjust it by turning the adjusting nut. If the rear brake
lamp switch is broken, replace it immediately.
To Next Page