8-CHANNEL SCANNER-8208
REF NO: m82A/om/101
masibus
Issue NO: 08
User‟s Manual Page 40 of 42
Note:
1) More than one Group can not be selected for single Channel.
2) None means no group is selected for particular Channel.
3) When G -10 is selected in any channel it show on Group No. Display.
Relay Type can be selected as shown below:
For relay functionality Refer Relay outputs (Chapter – 7).
G – 1, G – 2,
G – 3, G – 4,
G – 5, G – 6,
G – 7, G – 8,
G – 9, G - 10
Low ON (L) or High ON (H)
To Next Page