8-CHANNEL SCANNER-8208
REF NO: m82A/om/101
masibus
Issue NO: 08
User‟s Manual Page 5 of 42
2. INSTALLATION:
How to Install:
Mounting method: Panel mounting
To install the controller select a location where:
o no one may accidentally touch the terminals
o mechanical vibrations are minimal
o corrosive gas is minimal
o temperature can be maintained at about 25˚C to 35˚C and the
fluctuation is minimal
o no direct radiant heat is present
o no magnetic disturbances are caused
o no wind blows against the terminal board
o no water splashed
o no flammable materials are around
Turn off the power to the controller before installing it on the
panel because there is a possibility of electric shock
To Next Page
Loading...