be in accordance with the minimum clearances to combustibles indicated in these instructions.
CLEARANCE REQUIREMENTS
The minimum clearances to combustables may be reduced if the combustable walls are shielded with an
approved non-combustable material. Details of suitable materials and appropriate clearance reduction factors
are present in Section 3 of AS/NZS 2918:2001.
28/09/2010
KRMM0738
These instructions must be used in conjunction with the 'General Installation Instructions' for MASPORT
‡ Note: Clearances are for fire hazard only. For durability of finishes or surfaces you should contact the
relevant manufacturer for their specification. Glen Dimplex Australasia Ltd accepts no responsibility for the
deterioration of surfaces or finishes.
MODEL FLUE HEAT SHIELD
NEW ZEALAND
AUSTRALIA
MINIMUM DISTANCES TO HEAT SENSITIVE WALLS (mm)
MINIMUM DISTANCES TO HEAT SENSITIVE WALLS (mm)
MODEL FLUE HEAT SHIELD
Kronos
Multi Fuel
KRONOS DOUBLE SKIN S/S POLISHED
NOT
AVAILABLE
O:\W-F INSTALLATION SPECIFICATIONS\Individual Installation Data Sheets\INSTALLATION
SPECIFICATIONS INDIVIDUAL LOGAIRE\KRMM0738_Kronos Multi Fuel_Data Sheet-10-09-07.xls