MASSEY FERGUSON 430 - Massey Ferguson Recommended Lubricants

Maintenance and Adjustment
60
410/420/430 - 001 8903 U1
UZEL
Massey Ferguson recommended lubricants
Engine specification:
Use MULTIGUARD® 5W30 Motor Oil,
or
MULTIGUARD® 15W40 Motor Oil,
or
MULTIGUARD® 10W30 Motor Oil,
or
MULTIGUARD® Straight Weight Motor Oil.
Capacity:
All models 6,8 liters (1.8 US gal )
Requirements:
Oil must meet the following minimum specification:
API CC/CCMCD1 or API CD/CCMCD2
Viscosity:
Transmission and Hydraulics
Specification:
PERMATRAN III®
Capacity:
410, 420, 430 35,0 liters ( 9.2 US gal )
Four-wheel Drive Front Axle (MF 420 only)
PERMATRAN III®
Capacity:
Axle 3.75liters (1.0 US gal )
Planetery hub (each side) 0.2 liters (0.35 US pints )
20.11 SD type Four-wheel Drive Front Axle (MF 430 only)
Capacity:
Axle 5.5 liters (1.5 US gal )
Planetery hub (each side) 0.2 liters (0.42 US pints )
Degree °F
Ambient temperature range Oil viscosity - SAE number
Degree °C
Cold
Temperature
Hot
Below 41
25 to 81
Above 64
Below 5
- 4 to + 27
Above 18
10W, 10W/20, 10W/30
10W/30, 20W, 15W/30, 20W/30, 10W/40, 15W/40,
20W/50
15W/40, 20W/30, 20W/40, 20W/50, 30W
Table 6