Massey Ferguson 6400 - Issue 2
02B01.15
Splitting - Perkins Engine / GBA20 Gearbox
Servicing at the front of the cab
45. Disconnect the connectors (2) and the ground
terminals (1) on the left-hand side of the cab wall
(Fig. 20).
Preparing for disassembling
46. Stop the front axle oscillation by sliding a suitable
wooden chock either side of the support (1)
(Fig. 21).
47. Chock the rear wheels.
48. Install (Fig. 22):
- a fixed stand at the front of the gearbox,
- a mobile stand at the back of the engine.
49. If necessary, separate the cab from the front right-
and left-hand supports.
Gently lift the cab front using two straps fitted to
the lateral handles.
Fix the cab in a raised position
Momentarily place a wooden chock between each
support and the cab right- and left-hand attach-
ments.
Fig. 20
Fig. 21
Fig. 22
To Next Page
Loading...