MASSEY FERGUSON 6465 - C. Reassembly

Massey Ferguson 6400 - Issue 4.a
2A30.10
Splitting the front frame/Sisu engine - MF 6497-6499
C . Reassembly
33. Clean the mating faces of the engine and front
frame.
34. Screw a guide studs onto each rear face of the
front frame (Fig. 15).
35. With the help of an operator, assemble the front
frame onto the engine.
36. Tighten two screws (1) (Fig. 13).
Take out the guide studs.
Fit and tighten the diametrically opposed screws
(Fig. 13) in the following order:
- screws (1) to a torque of 240 - 320 Nm;
- screws (2) to a torque of 480 - 640 Nm;
- screws (3) to a torque of 800 - 1040 Nm.
MA-02-05123A
Fig. 15
¤
H