Massey Ferguson 6400 - Issue 1
02A02.2
Splitting - Front frame / Sisu engine
A . General
The front frame and engine must be disassembled
when the assemblies need to be replaced, or when
servicing is necessary on one of the mechanical
elements located at the front of the engine.
Remark
This section presents a general disassembly proce-
dure. Before and during disassembly, check that all
connections have been properly separated between
the fixed assembly and mobile assembly
B . Disassembling
Preliminary operations
1. Put on the handbrake if necessary.
Remark
Putting on the handbrake is optional because the Park
Lock mechanism (option) automatically immobilises
the tractor when stationary.
2. Ensure that the suspended front axle (if fitted) is in
raised position and position chocks between the
upper control arm and front axle housing (Fig. 1).
Remove the bleed screw from the control unit (see
chapter 9).
3. Remove the lateral panels from the engine and
bonnet.
Servicing under the tractor
4. Remove the guard and the 4WD shaft located
under the engine.
Fig. 1
To Next Page
Loading...